Full protection against power failure and overvoltage (over-voltage and under-voltage)
Recommended for PCs, DVR/NVR and video surveillance systems, ADSL/optical modems, switches/routers, cash registers.
Not suitable for power supplies with active PFC circuitry (servers, computer games, game consoles, workstations, Macs), lamps and electric motors
AVR automatic voltage regulator electronic circuit
2 Italy/Schuko output sockets and 1 Schuko input cable
Output socket protected against power failure
Output socket protected against overvoltage
Multi-function LED light and on/off button
USB port for controlling/monitoring the UPS and programming/turning off the ignition via Tecnomanager software
TecnoManager UPS management software is compatible with Windows, Mac OS X, Linux, etc.

ERA PLUS 1600 UPS, 12V 11Ah battery, with 1 fixed SCHUKO input cable and 2 SCHUKO outputs, protected against power failure, over-voltage and under-voltage. Line Interactive Plus technology. Dimensions 10x14x28 cm, weight 5,5 kg. Equipped with an on/off button with integrated multifunction LED with audible alarm to indicate the operating status and USB interface for monitoring the UPS continuity and programming the on/off via the free tecnomanager software for win/mac. Designed to protect office PC, DVR for video surveillance, ADSL-fibre modem/router, cash register. Completely silent.

Specifications:

Code FGCERAPL1602SCH
1600VA/1120W Maximum computer power.
Line-interactive with stabiliser
Interface: USB port
Cooling: Natural
Volume: < 40 dBA up to 1 m
Dimensions (UPS) WxHxD: 10.1×14.2×27.9 cm
Dimensions (with packaging): WxHxD 18x22x34 cm
Weight: 5 kg
Input
Number of phases 1F+N
Nominal voltage: Single phase 230Vac
Input voltage range: +20%/-25%
Rated frequency: 50/60 Hz (auto select)
Input frequency range: +/-5%
Output
Number of phases 1F+N
Nominal voltage: Single phase 230Vac
Voltage regulation: (line mode) AVR (automatic voltage regulation)
Voltage regulation (battery operation): +/-5%
Frequency: 50/60 Hz (automatic selection)
Inverter waveform: Modified sine wave
Overload capacity: < 130 %
Transmission time: 2 ms (typical)
Battery: Lead-acid type, sealed, maintenance-free
Operating time (typical) 10-40 min
Environmental specifications
Operating temperature: 0 to 55 °C (recommended 20 to 25 °C)
Humidity: < 95 % non-condensing
Maximum altitude: 3000 m
IP protection: IP20
Certifications: CE (Standards: Low Voltage Directive IEC EN 62040-1; Electromagnetic Compatibility Directive IEC EN 62040-2; Classification IEC EN 62040-3)
This UPS is designed and sized to protect IT workstations. The power, expressed as ‘maximum computer power’, corresponds to the sum of the power of the switching power supply boards present in the IT workstations to be protected. For any use with devices other than IT workstations, it is recommended to seek specific advice from the manufacturer.