The light sensor is used to automatically turn on the lights at dusk and turn them off at dawn. This helps you save electricity.

The sensor is protected by a waterproof housing.

Possible settings:

• ambient light from 3 to 500 LUX
• time delay: from 1 to 9 hours and the option to set from dusk to dawn

The sensor is suitable for mounting on the wall above lighting elements.

Cables can be routed from the back or bottom of the sensor.

Mounting accessories (screws and inserts) are included.

Installation:

• First, make sure there is no electrical voltage in the network
• Determine the correct position of the sensor: it must be installed above the light fixture to avoid malfunction.
• Connect the light (load) and power supply (electrical network) to the switch – the wiring diagram is provided in the enclosed instructions.
• After installation, turn the power back on and check the sensor’s operation.

Technical specifications: