The light sensor is used to automatically turn on the lights at dusk and turn them off at dawn. This helps you save electricity.

It consists of a sensor protected by a waterproof housing and an adjustable switch with a sensitivity range of 5 to 50 LUX.

The sensor and switch are connected by a 90 cm cable.

The switch is suitable for mounting on a DIN rail in an electrical cabinet.

Installation:

• First, make sure that there is no electrical voltage in the network.
• Determine the correct position of the sensor: it must be installed above the light fixture to avoid malfunction.
• Drill a 13 mm diameter hole in the surface for the sensor.
• Gently insert the sensor head into the mounting hole.
• Connect the light (load) and power supply (electrical network) to the switch – the wiring diagram is provided in the enclosed instructions.
• After installation, turn the power back on and check the sensor’s operation.

Technical specifications: